To find analytical solutions of nonlinear systems for locating the acoustic emission/microseismic（AE/MS） source without knowing the wave velocity of structures, the sensor location coordinates were simplified as a cuboid monitoring network. Different locations of sensors on upper and lower surfaces were considered and used to establish nonlinear equations. Based on the proposed functions of time difference of arrivals, the analytical solutions were obtained using five sensors under three networks. The proposed analytical solutions were validated using authentic data of numerical tests and experiments. The results show that located results are consistent with authentic data, and the outstanding characteristics of the new solution are that the solved process is not influenced by the wave velocity knowledge and iterated algorithms.
To find discriminating features in seismograms for the classification of mine seismic events,signal databases of blasts and microseismic events were established based on manual identification.Criteria including the repetition of waveforms,tail decreasing,dominant frequency and occurrence time of day were considered in the establishment of the databases.Signals from databases of different types were drawn into a unified coordinate system.It is noticed that the starting-up angles of the two types tend to be concentrated into two different intervals.However,it is difficult to calculate the starting-up angle directly due to the inaccuracy of the P-wave arrival＇s picking.The slope value of the starting-up trend line,which was obtained by linear regression,was proposed to substitute the angle.Two slope values associated with the coordinates of the first peak and the maximum peak were extracted as the characteristic parameters.A statistical model with correct discrimination rate of greater than 97.1% was established by applying the Fisher discriminant analysis.
