Residual stress developed during the rolling process of tailor rolled blank （TRB） can affect the springback of finished parts considerably. Springback characteristics of unannealed and annealed TRBs were investigated by means of numerical simulation and experiments taking U-Channel as an example. TRBs were annealed by the annealing process （700 ℃, holding time 10 h）, then stamping and springback processes of unannealed and annealed TRBs were simulated, and corresponding experiments were also carried out. Effects of the transition zone length, the blank thickness, the friction coefficient and the die clearance on the springback of TRB were analyzed. The results demonstrate that the springback of TRB annealed at 700 ~C for 10 h re- duces significantly. For unannealed and annealed U-Channels, the springback of TRB U-Channel is in direct proportion to the die clearance and is in inverse proportion to the transition zone length, the blank thickness and the friction coefficient. Spring- backs of the thinner monolithic （uniform thickness） blank, the thinner side of TRB, the thicker side of TRB and the thicker monolithic blank are sorted in descending order.
The effects of strain, strain rate and temperature on the mechanical behavior of 22MnB5 boron steel deformed isothermally under uniaxial tension tests and the experimental characterization of 22MnB5 boron steel in the austenitic region have been investigated. Based on the crystal plasticity theory and thermal kinematics, an improved integration model is presented. In this model, the elastic deformation gradient is the integration variable of the governing equation, which contains not only the elastic deformation but also the thermal effects. In the coupled thermo- mechanical process, this model can reveal the evolution of microstructures such as the rotation of a single crystal and the slip systems in each of them. The plastic behavior of the boron steel can be well described by the presented model.
Dan ZhaoYiguo ZhuLiang YingPing HuYing ChangWanxi Zhang
