At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method（LSM）,a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory（ENO）and total variation diminishing（TVD）methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.
Developing an efficient and robust lightweight graphic user interface （GUI） for industry process monitoring is always a challenging task. Current implementation methods for embedded GUI are with the matters of real-time processing and ergonomics performance. To address the issue, an embedded lightweight GUI component library design method based on quasar technology embedded （Qt/E） is proposed. First, an entity-relationship （E-R） model for the GUI library is developed to define the functional framework and data coupling relations. Second, a cross-compilation environment is constructed, and the QI/E shared library files are tailored to satisfy the requirements of embedded target systems. Third, by using the signal-slot communication interfaces, a message mapping mechanism that does not require a call-back pointer is developed, and the context switching performance is improved. According to the multi-thread method, the parallel task processing capabilities fbr data collection, calculation, and display are enhanced, and the real-time performance and robustness are guaranteed. Finally, the human-computer interaction process is optimized by a scrolling page method, and the ergonomics pertbrmance is verified by the industrial psychology methods Two numerical cases and five industrial experiments show that the proposed method can increase real-time read-write correction ratios by more than 26% and 29%, compared with Windows-CE-GUl and Android-GUl, respectively. The component library can be tailored to 900 KB and supports 12 hardware platforms. The average session switch time can be controlled within 0.6 s and six key indexes for ergonomics are verified by different industrial applications.
