您的位置: 专家智库 > 资助详情>国家高技术研究发展计划(2006AA01Z226)

国家高技术研究发展计划(2006AA01Z226)

作品数:46 被引量:117H指数:5
相关作者:邹雪城刘政林韩煜陈毅成但永平更多>>
相关机构:华中科技大学湖北汽车工业学院更多>>
发文基金:国家高技术研究发展计划湖北省自然科学基金教育部“新世纪优秀人才支持计划”更多>>
相关领域:电子电信自动化与计算机技术更多>>

文献类型

  • 46篇中文期刊文章

领域

  • 32篇电子电信
  • 22篇自动化与计算...

主题

  • 10篇网络
  • 10篇无线传感
  • 10篇功耗
  • 10篇传感
  • 9篇低功耗
  • 8篇无线传感器
  • 8篇无线传感器网
  • 8篇无线传感器网...
  • 8篇加密
  • 8篇感器
  • 8篇传感器
  • 8篇传感器网
  • 8篇传感器网络
  • 7篇加密标准
  • 6篇电路
  • 6篇硬件
  • 6篇高级加密标准
  • 6篇AES
  • 5篇芯片
  • 4篇硬件实现

机构

  • 41篇华中科技大学
  • 1篇湖北汽车工业...

作者

  • 37篇邹雪城
  • 25篇刘政林
  • 11篇韩煜
  • 10篇陈毅成
  • 6篇但永平
  • 5篇雷鑑铭
  • 4篇易立华
  • 4篇郑朝霞
  • 4篇姜天杰
  • 3篇刘冬生
  • 3篇陈晓飞
  • 3篇张科峰
  • 2篇蔡梦
  • 2篇陈黎明
  • 2篇曾永红
  • 2篇邹志革
  • 2篇金海
  • 2篇霍文捷
  • 2篇郭文平
  • 1篇艾金鹏

传媒

  • 15篇华中科技大学...
  • 10篇微电子学与计...
  • 4篇High T...
  • 3篇微电子学
  • 2篇计算机工程与...
  • 2篇计算机与数字...
  • 2篇固体电子学研...
  • 1篇电子技术应用
  • 1篇计算机工程
  • 1篇计算机应用研...
  • 1篇自动化与仪器...
  • 1篇小型微型计算...
  • 1篇应用科学学报
  • 1篇微计算机信息
  • 1篇Wuhan ...

年份

  • 2篇2011
  • 4篇2010
  • 14篇2009
  • 22篇2008
  • 4篇2007
46 条 记 录,以下是 1-10
排序方式:
AES能量攻击的建模与分析被引量:6
2008年
在CMOS工艺实现的数字电路中,瞬时能量消耗很大程度上取决于当前时刻处理数据的中间结果。基于这一原理对加密设备实施的能量分析(PA)攻击能有效地破解密钥。本文针对高级加密标准(AES)建立了电路模型,从理论上用不同的统计方法在仿真平台上验证了差分能量分析(DPA)和相关能量分析(CPA)对AES攻击的可行性,在此基础上给出了一种低成本的抗能量攻击方法。
刘政林韩煜邹雪城陈毅成
关键词:AES
IEEE802.15.4协议安全模式的软硬件协同设计被引量:1
2008年
针对无线传感器网络协议IEEE802.15.4安全模式的实现,基于GEZEL设计环境,选择较低成本的8bit微处理器平台Dalton8051,对安全模式配置和高级加密标准(AES)数据通路进行了软硬件协同设计与协同仿真.充分考虑处理器资源占用、系统灵活性,通信容许带宽,对设计进行了合理的软硬件划分、简单的指令设置,电路模块重用.实验结果表明该设计能够提供灵活的安全模式配置、最小化8051资源占用率、保证了协议868/915 MHz频段通信速率要求.
韩煜邹雪城刘政林
关键词:信息安全高级加密标准无线传感器网络软硬件协同设计
An asynchronous pipeline architecture for the low-power AES S-box
2008年
To obtain a low-power and compact implementation of the advanced encryption standard (AES) S- box, an asynchronous pipeline architecture over composite field arithmetic was proposed in this paper. In the presented S-box, some improvements were made as follows. (1) Level-sensitive latches were inserted in data path to block the propagation Of the dynamic hazards, which lowered the power of data path circuit. (2) Operations of latches were controlled by latch controllers based on presented asynchronous sequence element: LC-element, which utilized static asymmetric C-element to construct a simple and power-efficient circuit structure. (3) Implementation of the data path circuit was a semi-custom standard-cell circuit on 0.25μm complementary mental oxide semiconductor (CMOS) process; and the full-custom design methodology was adopted in the handshake circuit design. Experimental results show that the resulting circuit achieves nearly 46% improvement with moderate area penalty ( 11.7% ) compared with the related composite field S-box in power performance. The presented S-box circuit can be a hardware intelli-gent property (IP) embedded in the targeted systems such as wireless sensor networks (WSN), smart-cards and radio frequency identification (RFID).
曾永红Zou XuechengLiu Zhenglin
关键词:S-BOX
无源高频RFID标签芯片电源产生电路
2009年
无源RFID标签芯片的能量来自读写器发射的射频能量。针对符合ISO/IEC15693标准的无源高频(13.56 MHz)RFID标签芯片,对NMOS栅交叉连接整流电路结构进行了研究与设计,实现的NMOS栅交叉连接整流电路的能量转换效率为34.46%,并设计一种低成本、低功耗的芯片工作电源产生电路,设计工艺采用SMIC 0.35μm 2P3M CMOS EEPROM工艺。最后,给出了芯片的测试结果。测试结果显示:所设计的电源产生电路能够很好地工作在ISO15693标准定义的最小磁场Hmin(150 mA/m)和最大磁场Hmax(5 A/m)之间。
刘冬生邹雪城余凯杜芷君
关键词:RFID标签芯片整流电路电流镜
Ethernet Controller SoC Design and Its Low-Power DFT Considerations被引量:1
2008年
In this paper, an Ethernet controller SoC solution and its low power design for testability (DFT) for information appliances are presented. On a single chip, an enhanced one-cycle 8-bit micro controller unit (MCU), media access control (MAC) circuit and embedded memories such as static random access memory (SRAM), read only memory (ROM) and flash are all integrated together. In order to achieve high fault coverage, at the same time with low test power, different DFT techniques are adopted for different circuits: the scan circuit that reduces switching activity is implemented for digital logic circuits; BIST-based method is employed for the on-chip SRAM and ROM. According to the fault-modeling of embedded flash, we resort to a March-like method for flash built in self test (BIST). By all means above, the result shows that the fault coverage may reach 97%, and the SoC chip is implemented successfully by using 0.25 μm two-poly four-metal mixed signal complementary metal oxide semiconductor (CMOS) technology, the die area is 4.8×4.6 mm^2. Test results show that the maximum throughput of Ethemet packets may reach 7Mb·s^1.
ZHENG Zhaoxia ZOU Xuecheng YU Guoyi
椭圆曲线密码ML算法电路实现的功耗攻击
2009年
针对有限域GF(2163)上椭圆曲线密码(ECC)的ML算法电路,实现了一种简单有效的差分功耗分析(DPA)方法.该方法结合单密钥多数据攻击,按密钥比特对功耗轨迹分段差分运算.基于功耗仿真的实验结果表明:仅对单条功耗曲线进行差分分析就能够以极短的时间恢复出密钥比特,从而证明ECC的ML算法实现只具备抗时间攻击和抗简单功耗分析攻击效果,却不能对抗DPA攻击.
韩煜邹雪城刘政林但永平
关键词:椭圆曲线密码功耗攻击差分功耗分析
无线传感器网络SoC休眠唤醒机制的设计实现被引量:5
2009年
在网络节点SoC中常用的低功耗策略是提供休眠唤醒支持.首先分析了电路功耗产生机理的基础上,采用关闭时钟和关闭电源的两种不同的休眠工作模式及为实现它们的双电源供应结构,讨论了其中的支持休眠唤醒机制的供电模块设计、数据保持和隔离设计和MAC时钟恢复问题,最后利用可配置的协处理器和双振荡器设计以实现缩短唤醒时间.
艾金鹏刘政林陈毅成邹雪城
关键词:无线传感器网络低功耗SOC
基于阻尼系数控制频率补偿的无电容型LDO设计被引量:2
2009年
基于级间密勒补偿技术,产生一个低频主极点,并通过阻尼系数控制(DFC)单元调节两个次主极点略高于单位增益频率(UGF),使得无电容型LDO开环传递函数中在UGF内只有一个极点,从而保证环路稳定性,同时又优化了系统的动态响应.基于该结构,采用HHNEC0.25μm CMOS工艺,设计了一个1.8V100mA的适合SoC应用的无电容型LDO.其电压降为50mV,在50μA到100mA的负载电流范围内,开环传递函数相位裕度高于55度,瞬态电压过冲值低于140mV,负载电流在最大值与最小值之间阶跃变化时,最大恢复时间为3μs,系统静态电流为40μA.
邹志革杨诗洋邹雪城雷鑑铭陈晓飞余国义
关键词:频率补偿稳定性
可重构幸存路径管理Viterbi译码器的研究与设计被引量:1
2011年
根据现代通信系统对自适应性和低功耗的要求,设计了一种自适应的Viterbi译码器,通过设计可重构的幸存路径存储管理单元(SMU),译码器可以根据不同调制方式自适应地选择回溯深度,并通过简化分支度量运算,降低了Viterbi算法中分支度量单元(BMU)和加-比-选单元(ACSU)的复杂度.经FPGA仿真结果表明,该算法性能满足自适应要求,且占用硬件资源低,可降低功耗14%左右,可用于含多速率多调制方式的移动通信系统.
张维津张科峰
关键词:VITERBI译码器可重构低功耗
A low-cost compact AES architecture for wireless sensor network
2010年
The implementation of small size cryptography algorithm is a critical problem for wireless sensor network. A low cost compact intellectual property (IP) core of the entire advanced encryption standard (AES) algorithm for wireless sensor network is presented in this paper. A compact encryption and decryption system using only four sharing S-Boxes is obtained, employing sharing between the encryption and decryption processes. Our design proposes use of composite field data path for the SubBytes and InvSubBytes transformations. With an implementation of the AES block cipher with Virtex Ⅱ Pro FPGA using0.13μm and 90nm process technology, our area optimized consumes 16.8k equivalent gates. The speed of this implementation is also reduced to 0.45Gbits/s. Compared with previous implementations, our design achieves significant low-cost area with acceptable throughput.
易立华 Zou Xuecheng Liu Zhenglin Dan Yongping Zou Wanghui
共5页<12345>
聚类工具0