The formation of phosphorous surface inverse segregation （SIS） in twin-roll cast strips of low-carbon steels was studied. High phosphorous strips were fabricated by using a pilot twin-roll strip caster and a melt/substrate contacting apparatus, respectively. Solidification structures of strips were observed and analyzed, and phosphorus distributions along longitudinal sections of strips were investigated and discussed. The results showed that solidification structures of all strips were columnar grains, either integrated or coarse in the strip made by the melt/substrate contacting apparatus or damaged in some degree in cast strips; and that during cast strip solidification, enrichment of phosphorus occurred between columnar grains, and the average phosphorus concentration near the surface in the strip with 0.15% of phosphorus was measured to be about 0.27% which was obviously higher than that in the bulk.
In the present paper, low carbon steel strips with different phosphorus contents were produced using a twin roll strip casting process. The solidification structure was studied and its features were analyzed in detail. It was found that the strips possessed a fine microstructure compared with the mould cast steels. With increasing phosphorus content more ferrite has been formed with finer grains.
Na LI Zhenyu LIU Yiqing QIU Zhaosen LIN Xianghua LIU Guodong WANG
