The molecular dynamics (MD) was employed to simulate the diffusion coefficient of sodium chloride at infinite dilution in supercritical water from 703.2 K to 763.2 K and from 30 MPa to 45 MPa. Based on the simulated data and the Patel-Teja(PT) equation of state and the Liu-Ruckenstein equation, an equation for calculating the diffusion coefficient of NaCl at infinite dilution in supercritical water is proposed. Both the agreement between the simulated and correlated data, and that between the simulated and predicted data of diffusion coefficients for NaCl in supercritical water ranging from 703.2K to 803.2 K and from 25 MPa to 50 MPa show that this equation is applicable for the calculation of diffusion coefficients.
A self-made lipase preparation from Candida sp. 99-125 was used for the production of biodiesel through enzymatic esterification of fatty acids. The crude lipase powder and fermentation broth were immobilized on a cheap fiber cloth carrier. The conditions of lipase-catalyzed esterification between long-chain fatty acids and methanol in a solvent system were investigated in detail, including the temperature, pH value, substrate concentration, solvent, absorbent agent, enzyme dosage and purity, immobilization method, the mode of addition of substrate. The results show that reaction temperature, pH of lipase micro-environment, substrate concentration, enzyme dosage and purity affect the esterification strongly. Several new methods and enzymatic procedures for improving the enzymatic reaction involving the process cost are also discussed, such as fossil diesel fuel as reaction solvent, immobilization method, multi-step gradient addition of methanol. The esterification degree of 92.8% was obtained with oleic acid and methanol under the optimal reaction condition after 12.5 h reaction time. The half-life of the immobilized lipase preparation from crude free lipase powder for esterification was 15 days.