The interior tomography is commonly met in practice, whereas the self-calibration method for geometric parameters remains far from explored. To determine the geometry of interior tomography, a modified interval subdividing based method, which was originally developed by Tan et al.,^[11] was presented in this paper. For the self-calibration method, it is necessary to obtain the reconstructed image with only geometric artifacts. Therefore, truncation artifacts reduction is a key problem for the self-calibration method of an interior tomography. In the method, an interior reconstruction algorithm instead of the Feldkamp-Davis-Kress （FDK） algorithm was employed for truncation artifact reduction. Moreover, the concept of a minimum interval was defined as the stop criterion of subdividing to ensure the geometric parameters are determined nicely. The results of numerical simulation demonstrated that our method could provide a solution to the self- calibration for interior tomography while the original interval subdividing based method could not. Furthermore, real data experiment results showed that our method could significantly suppress geometric artifacts and obtain high quality images for interior tomography with less imaging cost and faster speed compared with the traditional geometric calibration method with a dedicated calibration phantom.
Radial imaging techniques, such as projection-reconstruction （PR）, are used in magnetic resonance imaging （MRI） for dynamic imaging, angiography, and short-T2 imaging. They are less sensitive to flow and motion artifacts, and support fast imaging with short echo times. However, aliasing and streaking artifacts are two main sources which degrade radial imaging quality. For a given fixed number of k-space projections, data distributions along radial and angular directions will influence the level of aliasing and streaking artifacts. Conventional radial k-space sampling trajectory introduces an aliasing artifact at the first principal ring of point spread function （PSF）. In this paper, a shaking projection （SP） k-space sampling trajectory was proposed to reduce aliasing artifacts in MR images. SP sampling trajectory shifts the projection alternately along the k-space center, which separates k-space data in the azimuthal direction. Simulations based on conventional and SP sampling trajectories were compared with the same number projections. A significant reduction of aliasing artifacts was observed using the SP sampling trajectory. These two trajectories were also compared with different sampling frequencies. ASP trajectory has the same aliasing character when using half sampling frequency （or half data） for reconstruction. SNR comparisons with different white noise levels show that these two trajectories have the same SNR character. In conclusion, the SP trajectory can reduce the aliasing artifact without decreasing SNR and also provide a way for undersampling recon- struction. Furthermore, this method can be applied to three-dimensional （3D） hybrid or spherical radial k-space sampling for a more efficient reduction of aliasing artifacts.
Cell image segmentation is an essential step in cytopathological analysis.Although their execution speed is fast,the results of cell image segmentation by conventional pixel-based,edge-based and continuity-based methods are often coarse.Fine structures in a cell image can be obtained with a method that quickly adjusts the threshold levels.However,the processing time of such a method is usually long and the final results may be sensitive to intensity differences and other factors.In this article,a new energy model is proposed that synthesizes a differential equation from the conventional and level set methods,and utilizes the nonuniformity property of cell images (e.g.cytoplasms are more uneven than the background).The feasibility and robustness of the proposed model was demonstrated by processing relatively complicated background images of both simulated and real cell images.
